It is the best material to be chosen especially for children’s playgrounds, as it prevents injuries that may occur as a result of falling or impact, thanks to its protective feature, flexibility and shock absorbency. It is much more hygienic and healthy than sand. Thanks to its superior drainage feature, it does not accumulate water even after heavy rains. It provides a dry and non-slip floor feature. It is very easy to clean, it can be easily cleaned after rain or with water.
It is long-lasting and can be easily repaired when necessary thanks to its disassembly feature. In addition to its flexibility, it is extremely resistant to abrasions and impacts. It is a material that reduces energy loss, does not tire people, and has an extremely high walking comfort. It provides heat and sound insulation. It is resistant to UV sun rays, does not deform due to low and high temperatures. It can be used safely in areas with low temperatures and snowfall. It provides a flat surface, does not contain indentations and protrusions that will cause stumbling.
Rubber Flooring
After determining the product features such as shape, thickness, color and model, first of all, ground preparation is done. After obtaining a flat and smooth concrete floor, the adhesive material, approximately 0.85 kg per m², is applied to the concrete surface with a marley comb, and the coating process is started. Adhesive application and coating process should be applied in rows of 5-7 meters. In the use of rubber material with six eggs, direct application can be made without adhesive by screeding with fine sand on the compacted and leveled soil surface. Detailed technical information about the application method will be given after your order.
The rubber floor covering price material to be used on the floors of children’s playgrounds will be produced in 400×400 mm tile model. Rubber flooring material has high U.V. must be manufactured by pressing the rubber 3/5 mesh granular rubber particles with special adhesives under high pressure and high temperature. There should never be rubber scraps in the form of thin-long scrapers. The upper edges of the rubber paving stones will be chamfered to form a joint. The thickness of the coating material should be 20/40mm. In order to provide drainage and better adhesion to the ground, there should be round and rectangular ridges at least 5 mm high on the bottom of the rubber material. Rubber flooring will be applied to the concrete and screed surface prepared by the administration with special polyurethane adhesives. Not less than 0.500 kg of adhesive will be used for each m2. The rubber material should be flexible enough to bend completely. The points where the pipes of the playgrounds come from shall be cut and the gaps between the pipes to be joined to the pipes shall not exceed 10 mm.
Flooring Systems 